How to set PS mode only
- Go to dialler and type *#9090#
- Tap menu and choose back
- Tap menu again and choose key input and type Q
- Tap menu again and choose key input and enter input 00002112113
- Wait for about 15s, and there should be information that SELECT NET_SVC_DOMAIN_PS_ONLY
- Tap menu again and choose close.
How to set CS+PS mode
- Go to dialler and type *#9090#
- Tap menu and choose back
- Tap menu again and choose key input and type Q
- Tap menu again and choose key input and enter input 00002112111
- Wait for about 15s, and there should be information that SELECT NET_SVC_DOMAIN_PS_ONLY
- Tap menu again and choose close.
Note**
Please follow instruction given accordingly.
Tap menu can be found at top right after entering *#9090#
Please disconnect UE from Nemo Outdoor or Exit Nemo Handy before performing steps above. Restart the UE every each setup either PS only or CS+PS mode.
Thank you.
No comments:
Post a Comment